views
Using Cleanser on Platinum
Purchase a cleansing solution for platinum or fine jewelry. There are several products available which are made for cleaning fine metals and jewelry. These contain polymers which buff out small blemishes in your platinum while being gentle enough not to damage the metal. Consult your local jeweler about which cleansers he would recommend. You can also use warm water and mild soap if the platinum is not terribly tarnished. Use a cleanser for a deeper clean.
Brush the platinum with a soft bristled brush. A good choice is an old soft-bristled tooth brush. Dip the brush in your cleanser and gently scrub any tarnish from your platinum. Apply cleanser in the direction of the grain of the metal.
Rinse the platinum clean. Run some lukewarm water and rinse the platinum until all of the cleanser has been removed. If you notice some spots which still need cleaning, run the brush over these areas and rinse again. It is a good idea to stop the drain in the sink while you are rinsing your platinum so you don’t lose anything if it slips out of your hand.
Dry the platinum with a lint-free cloth. Avoid cotton cloths and towels, which could leave residue on your jewelry. For a really clean, dry finish, wipe the platinum clean with a microfiber cloth or a chamois to give it a nice shine.
Avoid cleaning precious stones set in platinum. While it is safe to clean your platinum with a commercial cleaner, any diamonds or precious stones set in the platinum could be more susceptible to damage. Check with your jeweler before you use cleanser on a piece of platinum that is mixed with other metals and precious stones.
Making Your Own No Scrubbing Solution
Line a pan with tin foil. A cookie sheet should work as long as it is deep enough to fit your platinum and have it completely covered in the solution. Make sure the foil has the shiny side facing up. Wrap the foil all the way around the edges of the pan to secure it. Spread your platinum pieces on the foil.
Mix your base solution. Combine one cup of boiling water with one tablespoon of salt and one tablespoon of baking soda. Stir the ingredients together until they are thoroughly mixed.
Pour the solution over your platinum. Carefully pour the the baking soda, salt and water solution into the pan. If your platinum moves when you pour over it, you can use a spoon to reposition the jewelry so it is flat.
Add vinegar to the pan. Pour half a cup of white vinegar to into the pan. The vinegar will activate the base solution and cause the it to begin bubbling. Leave the platinum in the bubbling solution for five to ten minutes.
Rinse and dry your platinum. Remove your jewelry from the pan. Run some lukewarm water and rinse each item until the solution and tarnish has been completely removed. Dry each piece with a lint-free towel for a nice shine.
Keeping Your Platinum Looking Clean and New
Remove your jewelry before performing tasks which could damage it. Certain tasks and chemicals can take a toll on your jewelry. It is best to remove it before you do something which could scratch your jewelry or expose it to harsh chemicals. Avoid wearing jewelry while cleaning the house with chemicals, or swimming in a chlorinated pool. Take off rings when you will be using your hands in manual labor like gardening or going to the gym. Put your makeup on first, then your jewelry. There could be chemicals in your makeup, lotions and hairspray which can build up on your jewelry. It is best to put jewelry on last.
Store your platinum in its own fabric-lined place. You can use a fabric pouch or a jewelry box with dividers and compartments to separate your jewelry. The main concern here is multiple pieces scratching each other when they are jumbled together in one box. Separate each item into its own space. You can also try wrapping the item in tissue paper if it is in a box with other pieces.
Clean your platinum every six months. This will keep any tarnish from having time to build up on your piece. You can do this yourself at home. Also consider taking it to a jeweler for a professional cleaning once a year. When you visit the jeweler have him check for any other issues like loose prongs or scratches.
Have a jeweler polish out any scratches. Platinum is an incredible durable metal, but it is still possible that you may end up with a visible scratch. Your jeweler can repolish the area leaving it looking as good as new.
Comments
0 comment