How to Clean Windows

Cleaning Inside and Outside Windows

Gather your supplies and tools. There are a few things you will need to perform a basic cleaning job on your windows, including a: Sponge or brush (or a squeegee) Rubber squeegee for drying Absorbent microfiber or lint-free cloth Clean cloth or rag Bucket filled with cleaning solution Large towel to protect inside floors

Make your cleaning solution. There are a few different cleaners you can try for your windows, but most experts recommend a basic water and dish soap mixture. Using a spray bottle and paper towel or newspaper will just move dirt and cleaning solution around, leaving windows streaky and murky. To make your window cleaner, you can mix: Two gallons (7.6 liters) of water with one teaspoon (6 ml) of dishwashing liquid. Equal parts water and white vinegar. ¼ cup (60 ml) each of isopropyl (rubbing) alcohol and vinegar, plus 1 tablespoon (15 g) cornstarch (to prevent streaks), and 2 cups (480 ml) water. EXPERT TIP Susan Stocker Susan Stocker Green Cleaning Expert Susan Stocker runs and owns Susan’s Green Cleaning, the #1 Green Cleaning Company in Seattle. She is well known in the region for outstanding customer service protocols — winning the 2017 Better Business Torch Award for Ethics & Integrity —and her energetic support of green cleaning practices. Susan Stocker Susan Stocker Green Cleaning Expert Our Expert Agrees: When you're cleaning windows, you only need water mixed with a dash of vinegar or a few drops of dishwashing soap. Apply the cleaner with a clean cloth, then dry the window with a squeegee.

Clean the windows. You can use a sponge for windows that have multiple small panes, and a squeegee for larger picture windows. Dip your sponge into the bucket of cleaner. Wring out the excess water and wipe down the entire window, being sure to get into all the corners. To clean high outside windows without a ladder, attach a squeegee or brush to an extension pole or broom handle. You can also use a special window cleaner that will spray up to the second floor from the ground. Once you clean a window, make sure you dry it before moving on to the next. If the squeegee squeaks a lot when you are washing or drying the windows, add a little more soap to the water.

Wipe the windows dry. For small-paned windows, use the rubber blade on the squeegee to wipe away the water vertically, working from top to bottom. For a picture window, use horizontal strokes. Start at the top and work down the window. Overlap each stroke by a couple inches (a few centimeters), and wipe the blade dry with a lint-free cloth between each stroke. Make sure the rubber blade is always in contact with the window. One of the easiest ways to get streak-free windows is to buy a good quality squeegee, and to make sure the rubber blade on it is sharp. Make sure you also have a streak-free window cleaning solution. Replace the rubber blade when it gets dull, because it will stop sealing properly and start leaving streaks.

Clean the inside of the windows and wipe up excess water. Anywhere that water spilled, dripped, or ran down the window, wipe the area dry with an absorbent, lint-free cloth. This will prevent streaks on the window. To prevent damage to the frame, use a separate cloth or rag to dry water from the window sill.

Pre-Cleaning Windows

Clean stubborn stains. Outside windows are especially prone to stubborn stains because they are exposed to hard water runoff, minerals, bird droppings, and elements that can cake on dirt and grime. There are a few methods you can try to remove marks on inside or outside windows: Use a mineral deposit removing cleaner, such as CLR. Dampen a sponge with cleaner and rub at the stains on the windows. Rinse the area with water and proceed with regular cleaning. Spray the affected area with pure vinegar and let it sit for at least five minutes. Use a sponge or cloth to rub the stain, and proceed with regular cleaning. Make a paste with water and a cleaner that contains oxalic acid, such as Zud or Bar Keepers Friend. Apply the paste to the affected area with a clean cloth and give it a good rub. Rinse away the paste and clean normally. You may be able to get off crusty or gritty stains by gently using a razor to scrape them off.

Remove stickers and decals. Whether you have children who love to decorate with stickers or applied decals to your windows to prevent birds from flying into them, removing sticky substances from windows can be difficult. However, all you really need is a spray bottle filled with water and a plastic scraper with a good edge. Spray the stickers with water and let it sit for a couple minutes. Hold the scraper against the window at a 45-degree angle and apply gentle pressure. Start below the stickers and scrape upwards to get underneath the stickers. Use a towel to wipe away the water.

Remove and clean the screens. For inside and outside windows, clean the screens every time you clean the windows, which should be twice a year. Remove the screens and vacuum them to remove dust and dirt. Use a hose or a spray bottle filled with water to lightly spray the screen both before and after you wipe it down. With a clean cloth or sponge, wipe them down with warm water mixed with a splash of vinegar or dish soap. Allow the screens to air dry fully before replacing them.

Rinse away dirt and grime from outside windows. Outside windows are exposed to all manner of grease, dirt, pollutants, and other materials. For really dirty windows, start the cleaning process by using a garden hose to rinse away the top layer of grime from the windows and panes. If you don’t have a hose, use a lint-free cloth and water to wipe away some of the dirt. You can also use a pressure washer as long as it is on a low setting.

Vacuum or dust inside windows. Make sure you get all the windows, frames, and corners. This will prevent you from just spreading dirt around when you are cleaning. Before you start cleaning inside windows, lay a large towel down in front of the window to catch spills.