Starting the Body of the Sweater
Take your measurements and decide which size sweater to make. Wrap a measuring tape around your bust and make a note of the size. Then, measure how long you'd like the sweater to be. Pick a sweater size that closely matches your measurements: Small (S): 32 in (81 cm) bust and 23 in (58 cm) length Medium (M): 36 in (91 cm) bust and 25 in (64 cm) length Large (L): 40 in (100 cm) bust and 27 in (69 cm) length Extra-large (XL): 44 in (110 cm) bust and 23 in (58 cm) length
Buy 4 to 6 skeins of yarn depending on the sweater size. Choose worsted weight yarn in any color you like. Each skein should weigh 5 oz (142 g) and be 251 yd (230 m) long. Pick yarn that's comfortable and made of acrylic, cotton, wool, or a blend. Depending on the size you're making, get out: S: 4 skeins M: 4 skeins L: 5 skeins XL: 6 skeins
Make a chain stitch (ch) on a size L (8.0 mm) crochet hook. Tie a slip knot and slide it onto the hook. Then, wrap your yarn around the hook and pull the yarn through the knot. This will make 1 ch.Tip: You'll also need a US size K (6.5 mm) and size H 5.0 mm crochet hook to make the rest of the sweater.
Crochet ch stitches to make a foundation chain. To make another ch stitch, insert your hook into the first ch you made and wrap the yarn around it. Pull it through the loop to make a ch stitch. To create your foundation chain, make a total of: S: 55 chains M: 61 chains L: 69 chains XL: 75 chains Edie Eckman Edie Eckman, Crochet Expert Crocheting a sweater is like making a tapestry of warmth and self-expression. Pick yarn that feels and looks good, and works with your pattern. Check gauge so the fit is right. Every stitch is a step towards your unique creation. Don't rush it. Savor the journey, from first loop to last seam. You're not just making a garment, but an heirloom.
Crocheting the Panels
Single crochet (sc) into every chain stitch for the first row. To create a nice edge that lays flat for your panel, make a sc stitch into each ch stitch of your foundation row. Did You Know? To sc, insert your hook into a stitch and wrap the yarn around it. Pull through the loop so there are 2 loops on your hook. Then, wrap the yarn around again and pull through both loops to make a sc stitch.
Ch 2 and turn the work to start the second row. Then, skip the first stitch (sk st) on the row and insert your hook into the second stitch to slip stitch (sl st) it. To sl st, wrap the yarn around your hook and pull it through both loops. This will be the beginning of a simple mesh stitch, which you'll work for the entire panel.
Ch 2, sk st, and sl st across row 2. To work the repeating mesh stitch pattern, you'll need to ch 2 stitches. Then, sk st and insert your hook into the following stitch on the row. Sl st it and keep working this pattern till the end of row 2: Ch 2, sk st, sl st into the next stitch.
Ch 2 and turn the work to start the third row. Once you reach the end of the second row, ch 2 and flip the work over. Now you can sl st into space that's below the ch 2 you made on the last row. Continue to ch 2 and sl st into the next space all across the row. The pattern for this row is ch 2, turn, sl st into the ch 2 space below and then repeat ch 2, sl st into the next sp until the end of the row. The fabric you're crocheting should now look like a loose mesh with some gaps.
Keep making row 3's pattern until the panel is as long as you like. Continue to ch 2 and sl st into the next gap for every row. Keep crocheting until your sweater panel is at least: S: 21 ⁄2 in (55 cm) long M: 23 ⁄2 in (60 cm) long L: 24 ⁄2 in (62 cm) long XL: 25 ⁄2 in (65 cm) long
Tie off the panel and crochet another identical panel. Once you've made the panel as long you'd like for your sweater, cut an 8 in (20 cm) tail and tie off the end. Thread the tail and weave it into the panel. Then, make another panel with the same dimensions.
Making the Sleeves
Chain up a new row to start the widest part of a sleeve. You'll be crocheting a rectangle of fabric that's wide at 1 end and narrow at the other end so you can fold it into a tube and stitch it to make a sleeve. To start a sleeve, use your size L (8.0 mm) crochet hook and make: S: 49 chains M: 55 chains L: 61 chains XL: 67 chains
SC into every stitch across row 1. Skip the first ch stitch that's closest to your hook and sc into the following stitch. Then, sc into every stitch until you reach the end. You're now working the upper part of the sleeve.
Ch 2, sk a stitch, and sl st before working the pattern for row 2. Once you've finished the first row for the upper sleeve, ch 2 and turn the work. Skip the single crochet stitch below and sl st into the next stitch. Then, continue to ch 2, sk a stitch, and sl st into the following stitch all across row 2. The repeating pattern for the row is: Ch 2, sk st, sl st into the next stitch.
Ch 2 and sl st into the space below before you crochet the row 3 pattern. At the end of row 2, ch 2 and flip the work. Sl st into the ch 2 space below and then start the repeating pattern for the rest of row 3. To work row 3, repeat: Ch 2, sl st into the next ch 2 space.
Repeat the pattern for row 3 until the sleeve is 5 inches (13 cm) long. This will make the upper sleeve before you start working with a smaller crochet hook. You'll also begin decreasing the stitches so the sleeve narrows at the mid-section.
Ch 3 using a size K hook and double crochet (dc) into the gap below. Switch to a size K (6.5 mm) hook to begin working the mid-section of the sleeve. Ch 3 stitches and turn the work before you dc into the first ch 2 space below. Then, make 2 dc stitches into the next ch 2 space. To finish this row, continue to: 2 dc in the next ch 2 space.
Ch 3, sk st, and dc into every stitch across the row. Remember to turn the work after your ch 3. Then, skip the first stitch of the row and dc into every stitch for the rest of the mid-section row.
Continue to dc the mid-section for at least another 5 inches (13 cm). When you reach the end of a row, ch 3 and turn the work. Then, skip the first stitch on the row before you dc into every stitch. Keep repeating this pattern until the mid-section that you're working with the K hook measures: S: 5 inches (13 cm) M: 6 inches (15 cm) L: 7 inches (18 cm) XL: 7 inches (18 cm)
Switch to a size H hook and continue the pattern for another 6 inches (15 cm). To make the lower section of the sleeve, start working on a size H (5.0 mm) crochet hook. Continue this pattern for a total of 6 inches (15 cm):Variation: If you want the sleeves to be narrower near the wrist, you can use an even smaller crochet hook. Ch 3, turn, sk a stitch, and dc every stitch of the row.
Cut a tail and weave in the end before you make another sleeve. Cut a 6 in (15 cm) yarn tail and thread it onto a tapestry needle. Weave the end through the sleeve to hide it. Then, make another identical sleeve.
Making Cuffs for the Sweater and Sleeves
Use a size L hook to ch 6 for a cuff. Slide a slip knot onto a size L (8.0 mm) crochet hook and ch 6. Sc the second stitch from the hook. Then, sc into every stitch across the row. When you get to the end, ch 1 and turn the work.
SC through each back loop (sc blo) for every row. To sc blo, insert your hook into the back of the stitch instead of the front loop and work a sc stitch. Crochet through the back of every stitch for the row.Did You Know? You'll continue to do this to make a cuff that you attach to the sweater or sleeves.
Crochet the cuff until it's as long as your sweater panel is wide. Continue to ch 1 and turn the work before you sc blo into each stitch across the row. Repeat this pattern until the cuff is long enough to fit across the bottom of 1 panel. Then, tie off the yarn and weave in the tail.
Make 2 cuffs for the sleeves. Repeat this pattern to crochet 2 short cuffs that will go at the small ends of the sleeves. Work each cuff until it's as long as the sleeve ending is wide. Then, cut the yarn and thread it onto a tapestry needle before you weave it into the fabric. For example, if your sleeve is 5 inches (13 cm) wide, make the cuff 5 inches (13 cm) long.
Assembling the Sweater
Thread a needle and whipstitch each sleeve. Take 1 of the rectangles you made for a sleeve and fold the long sides together to create a tube shape. Then, thread a needle with at least with at least 40 inches (100 cm) of yarn and whipstitch the sides together.Did You Know? To whipstitch, insert the needle into the first stitches of both fabric edges. Then, insert the needle through the inner loops of the following stitch.
Whipstitch the long sides of the body panels together. Lay both of the panels on top of each other and whipstitch from the bottom of the panels up towards the top. Measure the widest part of your sleeve and leave that much space near the top of the panels so you can sew the sleeves in place.
Sew the sleeves to the sweater and whipstitch the top of the shoulders. Put the sleeves in place so their seams are pointing down and whipstitch the sleeves to the sweater. Then, continue to sew along the top of the shoulders and leave about an 11 in (28 cm) opening in the middle of the sweater for your head. Remember to tie off the yarn and weave in the ends.
Seam each cuff to the sleeves and bottom of the sweater. Place the narrow cuffs at the end of the sleeves and whipstitch them in place. Then, take the long cuffs and seam them to the bottom of the sweater. Tie off the yarn and weave in the ends when you're done.
Comments
0 comment